Page 4
Copyright © 2010, SunReports. All Rights Reserved
20100819
we help you monitor:
solar electric
solar hot water
solar pool
heating
for more information go to:
www.sunreports.com
bay area
Printed using 30% post consumer recycled content by:
www.bayareagreenprinting.com
10
Optional:
Configure Apollo for Static IP.
Connect Apollo to a DHCP router. Find the IP
address assigned to the Apollo (typically via the
router setup interface) and connect to the IP
address (e.g. http://192.168.1.2/setup.html) with a
browser, Configure the IP Address, Mask, Gateway
and DNS
Power cycle Apollo to enable changes
IMPORTANT:
This is an advanced configuration and must
be coordinated with the customer's IT staff
!
Record the customer information and
sensor label names on the included
Configuration Sheet
IMPORTANT:
This information will be
needed to properly set up the unit on
www.sunreports.com
!
11
Realize
YourPower
www.sunreports.com
Sun
Reports
T M
Commercial
Apollo2
Quick Start Guide
Solar Pool Systems
For detailed instructions, see the
Apollo Installation Manual from www.sunreports.com
1
Add one serial number sticker from the
box to the Configuration Sheet
One sticker may be left with the end
user for their records
IMPORTANT:
The serial number
entered into the on-line system
MUST match the number on the
unit. This is what allows for the
mapping, identification and
environmental information
Page 1
!
General Configuration
T1
T2
Realize
YourPower
www.sunreports.com
Sun
Reports
T M
