Sunnydaze Decor LZH-063, Быстрый старт

Страница: 4 / 5

pedestal (E) to the blocks on the large basin as shown in Fig,insert the second large pedestal(E) and twist clockwise
to lock in place securely.(pls refer to fig 3.)
Step 4: Route the water tube of the fountain topper (K) downwards through the middle hole of the small basin (J),
then align the fountain topper (K) with the small basin (J). Make sure matching the slot under the fountain topper (K) to
the blocks on small basin (J) as shown in Fig4. Insert the fountain topper (K) and twist clockwise to lock in place securely
Step 5: Route the water tube of the assembled topper (K and J) downwards through the small pedestal ( I ). Align the
assembled topper (K and J) with small pedestal ( I ), insert the assembled topper and twist clockwise to lock in place securely.
pls refer to fig 5.
Step 6:Route the water tube of the assembled topper(K,J and I) downwards through the middle hole of third basin(H).Allign the
assembled topper(K and J and I) with thrid basin(H),Make sure matching the slot under the small pedestal ( I ) to the blocks
on third large basin(H) as show in Fig. 6,insert the seembled topper and and twist clockwise to lock in place securely.
Step 7:Route the water tube of the assmbled topper(K,J,I and H) downwards through the third large pedestal.Allign the
assembled topper(K,J.,I and H) with third large pedestal(G),insert the the assembled topper and twist clockwise to lock in
place securely.(Pls refer to fig.7)
Step 8: Route the water tube of the assebled topper (K.J,I.H and G) downwards through the middle hold of second
large basin(F). Allign the assembled topper(K,J,I and H) with second large basin(F),Make sure matching the slot under the
third large pedestal(G) to the blocks on the second large basin(F) as show in Fig 8,insert the assmbled topper and twist
clockwise to lock in place securely
Step 9: Route the water tube of the assembled topper(K,J,I,H,G and F) downwards through the assembled second large
pedestal.Allign the assembled topper(K,J,I,H,G and F) with second large pedestal(E),insert the assmbled topper and twise
clockwise to lock in place securely.(pls see fig.9)
Step 10: Through the door of second large pedestal,Connect the water tube to the outlet nozzle of pump (C). Make sure the
connection is tight.(refer to fig .10)
Step 11: Put the board (D) located at the door of the second large pedestal.(see fig .10)
Step 12: Fill the large basin (B) and the second basin (F) with water. Make sure the pump (C) is completely submerged in
water.
Step 13: Plug the pump power cord to the wall outlet to run the fountain.
DO NOT allow the pump to run dry!
Be careful not to spill water onto the plug of the pump.