SPQ1141
Page 1 / 2
DESCENDING STAIRCASE SLATE OUTDOOR WATER
FOUNTAIN WITH COPPER ACCENTS AND LED SPOTLIGHT
GSI-828
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.
Select a smooth, level surface to place the fountain.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
Note
: When first used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to flow.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at
888-881-4668
, by email:
, or via our contact us page at
www.SerenityHealth.com/contact-us/
Purchase Date: / / Order/Customer Reference Number:
NOTE:
The water tubing is built into the
upper fountain body. Take care when handling
the water tube; detaching the water tube from
the fountain will damage the fountain and void
the product warranty.
The copper components may patina; this is
a natural characteristic of copper and is not
cause for return or replacement.
No.
Parts
Qty.
A
Basin
1
B
Spotlight with AC Adapter
1
C
Electric Submersible Pump
1
D
Lower Fountain Body
1
E
Upper Fountain Body
1
F
Washer
2
G
Bolt
2
H
Decorative Stones
1
PK
I
Back Bolts
1
J
Splash Guard
1
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
CONNECTORS
H
A
C
D
G
F
I
E
B
J
01/2020
ASSEMBLY
1.
Place the light in the basin and connect the AC adapter.
2.
Gently place the upper fountain body onto the lower fountain body and secure them using the back bolts.
Secure the water tube from the upper fountain body to the clip on the back of the lower fountain body.
3.
Connect the pump to the water tube. Gently place the assembled components onto the basin and secure
the fountain body to the basin with the washers and bolts. NOTE: the pump has an adjustable flow rate;
adjust the dial to achieve the desired flow rate.
4.
Place the splash guard on the lower fountain body and gently lay the decorative stones in the basin.
5.
Fill the fountain with enough water to keep the pump fully submerged during operation; approximately 3 gallons.
6.
Plug the power cords into properly grounded GFCI outlets.
