SPQ1390
Page 1 / 2
LAYERED SLATE PYRAMID
OUTDOOR WATER FOUNTAIN AND LED LIGHT
GSI-798
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.
Select a smooth, level surface to place the fountain.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
Note
: When first used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to flow.
01/2020
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at
888-881-4668
, by email:
, or via our contact us page at
www.SerenityHealth.com/contact-us/
Purchase Date: / / Order/Customer Reference Number:
G
A
B
C
D
E
F
CONNECT
CONNECT
NOTE:
The water tubing is built into the pyramid topper. Take care when
handling the water tube; detaching the water tube from the fountain will
damage the fountain and void the product warranty.
No.
Parts
Qty.
A
Pyramid Topper
1
B
Finger Light
1
C
Electric Submersible Pump
1
D
Basin
1
E
Pedestal Top
1
F
Pedestal Bottom
1
G
Decorative Stones
1
PK
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
ASSEMBLY
1.
Place Pedestal Top (E) onto Pedestal Bottom (F).
2.
Gently set Basin (D) onto the pedestal.
3.
Run Pump (C) power cord down the center of the basin,
through the pedestal and under the groove in the back of
the pedestal.
4.
Connect Finger Light (B) to the short cable on the pump.
5.
Insert the light into the underside of Pyramid Topper (A).
6.
Connect Pump (C) to the water tube in Pyramid Topper (A)
and gently place the topper onto the basin.
7.
Gently place Decorative Stones (G) inside the basin.
8.
Fill the fountain with enough water to keep the pump fully submerged during operation; approximately 2 gallons.
9.
Firmly connect the AC Adapter and plug the power cord into a properly grounded GFCI outlet.
2-PERSON
ASSEMBLY
RECOMMENDED
