Sunny Health & Fitness SF-B2640 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 18

Sunny Health & Fitness SF-B2640 Скачать руководство пользователя страница 18

18

MAINTENANCE

Cleaning

The bike can be cleaned with a soft cloth and mild detergent. Do not use abrasives or
solvents on plastic parts.
Wipe your perspiration off the bike after each use.
Be sure that the monitor is not exposed to excessive moisture, as this could potentially
cause an electrical hazard and /or electronics to fail.
Keep the bike, especially the monitor, out of direct sunlight to prevent screen damage.
Inspect all assembly bolts and pedals on the machine before use to make sure they are
properly fastened and tightened.

Storage

Store the bike in a clean and dry environment.
Keep children away from the bike.

TROUBLESHOOTING

PROBLEM

SOLUTION

There is no display on the computer

1.  Remove  the  computer  and  verify  the
wire  that  comes  from  the  computer  is
properly  connected  to  the  wire  that
comes from the upright.
2.  Verify  that  the  batteries  are  correctly
positioned and are in proper contact with
the battery springs.
3. The batteries in the computer may be
dead.  Remove  and  replace  with  new
batteries.

The bike makes a squeaking noise when
in use

1. Inspect bolts. Tighten as needed.
2. Inspect moving parts to ensure that
they are properly lubricated.

The bike is not stable while in use

1. Inspect all the bolts have been fully
tightened.
2. Adjust the rear stabilizer end caps to
make it level.

Version1.1

«
...
16
17
18

Содержание SF-B2640



















Отзывы:

Нет отзывов