Sunmax RT-50D, Руководство оператора

Страница: 7 / 16

1. Open the power (g), turn the key switch to the right to horizontal position. The power/battery indicator (b) pointer swings to the current
power position.
2. Check ( b) whether the battery is fully charged; when the battery is fully charged, the pointer will point to the far right.
3. Step on the cleaning unit pedal (3) to lower the cleaning unit (10).
4. Start roller brush motor (e), suction motor (d), water tank switch (f).
5. Turn the speed knob (a) left to the minimum position, turn the forward switch (h) to the top, and slowly turn the speed knob (a) to
choose different walking speed according to the thickness of the carpet, and achieve the ideal cleaning effect.
The “open” and “close” of suction motor
1. Press the (I) of switch (d) to start suction motor.
2. To close suction motor, press (O) of switch (d).
The lift and fall of cleaning unit
1. Step on the brush pedal (3) to lift brush/ needle seat until
it is locked.
2. Step on the brush pedal (3) to unlock it, and slowly lift it up to lower
the brush.
Water tank flow setting/ clean and replace filter
Adjust water flow rate according to floor condition. Turn regulation knob (25) to control water flow. OFF shows the closed position. ON
shows the maximum water level. Clean the dirt in the filter (26) regularly according to the usage frequency (clean once every 1-3
days is recommended), and rotate to disassemble according to the direction of the arrow. Filter body (k), filter (L), sealing ring
(m), plug (n)
26
25
3
Machine operating instructions
6