Mystic Tan Kyss™
Owner’s Manual
42
Appendix 1: Faults
Faults are designated by the occurrence of an unintended or unsatisfactory event within the
booth’s operation. Faults can result from hardware, software, or user actions. Faults vary greatly
in severity and consequence. Some faults are simply registered to inform the technicians, while
others will cause the booth to halt operation until the issue is addressed.
Identifying a Fault in the Booth
When an unexpected operation occurs, the booth lists it as a fault of varying severity based on
the consequence of the issue occurring. The most important action is to alert the staff to an issue.
The booth is equipped with multiple notification capabilities to ensure that the message is
delivered to the appropriate individuals so that a rectifying action may be taken. There are three
main means of notification regarding a fault: The Gear icon on the Home screen turned blue to
indicate a message, the email notifications, and the booth reporting an error to Sunless Inc.
technical support. Each of these is discussed below.
Message Indicator on Home Screen
When a fault is detected, a message regarding the issue is created in the Staff > Messages page
(default Staff page). Whenever a message is created, the Settings icon on the Home screen turns
blue. Always check any messages when the icon appears blue.
Simply slide the latch open to access the
SD card without removing any covers!
Replace the card in the same manner.
