Mystic Tan Kyss™
Owner’s Manual
26
Clean Exhaust Filter
Clean the inner exhaust filter, as well as the inside and outside of the filter housing. Make
sure to have the spare filter clean, dry, and ready to insert. Avoid any abrasive cloths or
cleaners. Repeatedly failing to clean the exhaust vent can lead to clogged filters and
reduced ventilation due to an excess accumulation of spray tanning solution particles. If
the exhaust filter becomes clogged, this could reduce the effectiveness of the exhaust vent
and lead to a visible accumulation of excess solutions.
1
. Open the two (2)
Exhaust Latches by
pressing inward.
2
. Remove the existing
filter and clean, using
warm water. Have spare
filter on-hand.
3
. Wipe the interior and
exterior of the exhaust
housing with a soft, damp
towel. Insert the dry spare
filter into the housing and
close, making sure both
latches click.
EXHAUST RECAP: Use the latches to open the filter housing (1). Remove the inner filter (2). Rinse the inside
filter and let this filter dry overnight (to be used the next day). Wipe off all inside and outside surfaces with a
soft towel, avoiding any abrasive cloths or cleaning products. Replace with clean, dry filter (3). Also remove
and clean the small blue filter, replacing with the dry spare (4).
4
. Remove and clean
the smaller blue filter,
using warm water and
replace with the spare
filter while drying.
