OCTAGON GAZEBO ASSEMBLY INSTRUCTION
P 4
Step 1. Install the bottom screen(B) onto the Pentagonal Pipe(A1) and Pentagonal Pipe(A2)
by using bolr(BB) and flat washer(CC). (As showed in Fig.1-1 )
Step 2. Install the up screen onto the Pentagonal pipe(A1) and Pentagonal Pipe(A2) by using
bolt(AA) and flat washer(CC). (As showed in Fig.1-2) Complete the installation of C1
、
C2
、
C3
、
B
、
A1
、
A2 in turn according to Fig.1
Fig.1-1
A1
A2
B
Fig.1-2
2
A
1
A
C1
Step 3. Screw Center Hook (G) into the Poppyhead (F) and secure them properly.
(As showed in Fig2-1)
Step 4. Insert the small roof supporter(E) into the poppyhead (F).As showed in Fig2-2.
Fig.2-1
Fig.2-2
F
G
E
F
Fig.2-4
D1 D2
C1
C2
C3
Fig.2-3
D1
D2
E
Step 5. A ladder is needed for this step---insert one end of corner supporter(D1 and D2) into
the small roof supporter(E), as showed in Fig2-3.
Notice: The bigger corner of poppyhead should point to the large screen (C3) . Another end
shall be inserted into pentagonal pipe(A1 and A2), as showed in Fig2- 4.Finish the installation
of top frame in turns, as showed in Fig2-5.
CC BB
BB CC
BB CC
CC BB
CC AA
CC AA
AA CC
AA CC
