background image

4

Product Description

Purpose

•  This high-pressure electric power washer is intended for 

residential use only. It is designed for light-to-medium duty 

cleaning jobs on boats, motorcycles, RV’s, ATV’s, trailers, 

decks, barbecues, siding, patio furniture, and more.

Areas of application

•  Never use the machine in potentially explosive areas under 

any circumstances!

•  The operating temperature must be between 32ºF (0

ºC) and 

104ºF (40ºC).

•  The machine consists of an assembly with a pump, which 

is encased in a shock-absorbing housing. To provide the 

operator with an optimal working position, the machine is 

equipped with a spray wand and a non-slip handle grip, 

whose shape and configuration comply with applicable 

regulations. 

•  Do not cover or modify the spray wand or the spray nozzle 

in any way.

•  The high-pressure electric power washer is designed to be 

used with cold or lukewarm water; higher temperatures can 

damage the pump.

•  Do not use water that is dirty, gritty, or contains any 

chemical products, as such impurities could impair 

operation and shorten the life of the machine.

Содержание SPX1501





















Отзывы: