background image

Maint Storage

1.  Before operating, grease or oil wheel bearings, use 

automotive bearing grease or heavy weight oil.

2.  Periodically tighten all screws to make sure everything is 

secured before operating.

3.  Before operating make sure the tire pressure is within  

15 – 20 PSI.

4.  After each use, clean the cart thoroughly.
5.  Annually, apply a light coat of varnish to all wood surfaces.
6.  Use a glossy black enamel spray paint to touch up 

scratched or worn painted metal surfaces.

7.  Never exceed load capacity rating of 300 lbs (136 kg). It 

will damage the cart. 

8.  Store indoors during severe weather and winter months. 

NOTE: If a part needs replacement, only use parts that meet 

the manufacturer’s specifications. Replacement parts that do 

not meet specifications may result in a safety hazard or poor 

performance.

S Support

If your Sun Joe

®

 SJGC7-RM garden cart requires service or 

maintenance, please call Snow Joe

®

 + Sun Joe

®

 customer 

service at 1-866-SNOWJOE (1-866-766-9563) for assistance.

Model + Serial Numbers 

When contacting the company or arranging service from an 

authorized dealer, you will need to provide the model and serial 

numbers, which can be found on the decal located on the cart. 

Copy these numbers into the space provided below.

Record the following numbers from the housing or handle of your  

new product:

Model #:

Serial #:

S   J    G  C    7   -    R  M

8

Содержание SJGC7-RM













Отзывы: