__________________________________________________________________________________
11
2.2. Hardware Installation
The hardware installation of PCI Express Industrial I/O Control Board is easy
to carry out. Before inserting the card into the PCI Express bus, please follow
the detailed steps given below to install the board in your computer.
Step1. Turn your PC’s power off, and shut off the power to any peripheral.
Step2. Remove the power plug from the plug socket.
Step3. Remove the cover from the computer case.
Step4. If fitted. Remove the metal cover plate on the rear of a free PCI-E slot.
Step5. Insert PCI Express Industrial I/O Control Board into the free PCI
Express slot and screw it firmly on the bracket side.
Step6. Place the cover back onto the computer.
Step7. Insert the plug into the plug socket.
2.3.
Connector Installation
This product also contains connection cables and DIN-rail wiring board:
1. DB44 to 2-port DB9 Male & 1-port DB25 Female connection cable, 40cm
(SDC4880B only)
Safety First
To avoid damaging your system and boards, make sure your
PC’s power is turned off before installing PCI Express card.
