___________________________________________________________________________________
10
2.1 Hardware Installation
The hardware installation of M.2 PCI Express serial boards is simple. Before
inserting the card into the M.2 slot, please follow the detailed steps given
below to install the PCI Express serial board into your computer.
Step 1:
Remove the screw attached to the motherboard.
Step 2:
Insert M.2 Card tightly into the M.2 slot with 20° angle.
(SUNIX M.2 Card supports Key-M and Key-B slot)
Step 3:
Push the M.2 card down to the screw hole.
Step 4:
Lock screw on M.2 card that you remove from motherboard in step1.
Step 5:
Connect D-Sub cable with the M.2 card header one by one.
Step 6:
Secure the other end of the D-Sub cable to PC chassis by locking the hex screw.
Safety First
To avoid damaging your system and boards,
make sure your PC’s power is turned off
before installing add-on card.
