Sungrow SG36KTL-M, Руководство пользователя

Страница: 11 / 101

User Manual 1 Safety Instructions
3
but possible risk of explosion in very specific cases of fault. The housing will protect
persons and property from such an explosion, only if it is correctly sealed.
There is a risk of inverter damage or personal injury!
Do not disconnect DC connectors while the inverter is under AC load! First
de-energize the equipment from dual power sources and then verify that
there is no voltage present.
There is a risk of burn!
Prevent from touching device hot parts (such as heat sink) during operation.
Only LCD display panel and DC switch can be touched during inverter
operation.
Operate the inverter by strictly following the descriptions in this manual to avoid
unnecessary injury to the persons and damage to the device. Arc flash, fire or
explosion may follow if otherwise and Sungrow will hold no liability for the
damages followed.
At least the following improper operations can cause the arc flash, fire and
explosion inside the device. Remember all the time that these accidents can
only be handled by qualified personnel. Improper handling of the accidents
occurred may lead to more serious fault or accident.

Plugging in and unplugging the DC side HV fuse when it is alive;

Touching the end of the cables that have no insulation and may still be
alive;

Touch the connection copper bus bar, terminal or other spare parts inside
the device that may be alive;

The power cable connection is loose;

Spare parts like the bolts are falling inside the inverter;

Incorrect operation of the non-qualified persons that receives no training;
Before any operation to the device, a beforehand assessment of the possible