Sungrow SG250HX-US, Руководство пользователя

Страница: 31 / 106

21
Improper handling may cause personal injury!
• Arrange an appropriate number of personnel to carry the inverter according to
its weight, and installation personnel should wear protective equipment such
as anti-impact shoes and gloves.
• Attention must be paid to the center of gravity of the inverter to avoid tilting dur-
ing handling.
• Placing the inverter directly on a hard ground may cause damage to its metal
enclosure. Protective materials such as sponge pad or foam cushion should be
placed underneath the inverter.
• Move the inverter by holding the handles on it. Do not move the inverter by
holding the terminals.
4.4.1 Manual Transport
step 1 Release the sealing screws on the mounting ears with a flat-head screwdriver and store
them properly. Anchor the four supplied screw-in handles to the mounting ears and base of
the inverter.
step 2 Lift and move the inverter to the destination by using the side and bottom handles as well as
the four installed handles.
step 3 Remove the screw-in handles and reassemble the sealing screws released in Step 1.
- - End
4.4.2 Hoisting Transport
step 1 Release the sealing screws on the mounting ears and store them properly. Anchor two M12
thread lifting rings to the hangers of the inverter.
step 2 Lead the sling through the two lifting rings and fasten the tie-down strap.
step 3 Hoist the inverter, and stop to check for safety when the inverter is 100mm above the
ground. Continue hoisting the device to the destination after ensuring the safety.
User Manual 4 Mechanical Mounting