Sungrow SG2500HV-30, Системное руководство

Страница: 20 / 120

12
L LE ED D IIn nd diic ca atto orrss
The working status of the inverter can be acquired through these LEDs.
L LE ED D C Co ollo orr
D De essc crriip pttiio on n
POWER Green
The control circuit power supply is supplying power.
OPERATI-
ON
White
Inverter is in stop mode.
Green
Inverter is in grid-connected run mode.
Yellow Inverter is in alarm run mode.
FAULT Red
A fault occurs and has not been removed.
The indicator will be off when the fault is cleared.
E EM ME ER RG GE EN NC CY Y S ST TO OP P B Bu utttto on n
When an emergency occurs, the DC and AC circuit breakers are disconnected
automatically after pressing the emergency stop button.
After the fault is removed, release the emergency stop button with the specific key, and
then manually start the inverter.
T Th he e M MA AIIN NT TE EN NA AN NC CE E IIN NT TE ER RF FA AC CE E
The cover plate of the LCD can only be opened with the key. Remove the key and store
it properly after use.
3.1.2 Mechanical Parameter
D Diim me en nssiio on nss
External dimensions are shown in the figure below.
C Clle ea arra an nc ce e S Sp pa ac ce ess
The clearances around the inverter should be sufficient for the doors to be opened
3 Product Description System Manual