Sungrow SG125HV, Руководство пользователя

Страница: 50 / 122

5 Mechanical Installation User Manual
38
5.4.2 Installing to Concrete Wall
Step 1 Remove the bracket and corresponding fasteners from the packaging.
Step 2
Place the bracket on the chosen concrete wall and adjust it to proper
position and height.
Step 3
Mark the position for holes, drilling according to the hole positions of the
bracket.
Step 4
Drill holes according to the marks made before.
Check to ensure that there is no other electronic or plumbing installed
inside the wall before drilling holes.
Mark positions Drill holes
Step 5
Secure the bracket to the wall firmly by the supplied expansion bolt sets.
Torque of the fasten nut is 35 N

m.