Sungrow SG125HV, Руководство пользователя

Страница: 41 / 122

User Manual 4 Unpacking and Storage
29
F Big flat washer Two additional big flat washers are within the scope
of the delivery for future use if needed.
4.4 Inverter Storage
Proper storage is required if the inverter is not installed immediately. Sungrow
shall hold no liability for the damage of the device, in appearance or the failure
of internal components, caused by improper storage of the device as specified
in this manual. The inverter must be packed into its original carton with the
desiccant bags inside.
 The inverter must be packed into its original carton with the desiccant bags
inside.
 Seal the packing carton with adhesive tape.
 Store the inverter in a dry and clean place to protect it against dust and
moisture.
 Relative storage temperature: -40 ℃ ~70 ℃ (-40°F~158°F); Relative humidity:
0-95%.
 Stack the inverters in at most three layers. Do not store the inverters in stack
for more than half a year if the stack layer is more than three.
One layer
Two layers
Three layers
 Keep the inverter away from the chemical corrosive materials to avoid
possible corrosion.
 Periodically （ recommended: six months) check for any visible damages
during the storage period. Replace the packing material during the storage
period as necessary.
 The packing should be upright.