Installation Manual
10
The nameplate includes important parameter information on the inverter, and it
should be protected during transport, installation, maintenance, troubleshooting,
and other operations. Do not damage or tear it!
3.3
Inverter Storage
If the inverter is not to be installed or commissioned immediately upon reception, it should
be stored as described in this chapter. The inverter should be packed and stored in a
well-ventilated, dry, and tidy room. In addition, observe the following requirements:
Place the inverter in its original package with the desiccant inside.
The ground is flat and suitable for the weight of the packed inverter.
The storage environment should be well-ventilated, dry, and without any poundings.
Ambient temperature: -40
℃
to +70
℃
; and relative humidity: 0~95% without
condensation.
Take precautions to protect the device against damage due to harsh environment such
as shock cooling, shock heating, and collision.
Inspect the inverter regularly, at least once a week generally. Check the package for
completeness and replace it immediately when necessary.
Unpack and check the inverter in powered on state if it has been stored more than half
a year.
The inverter must be packed during storage!
No outdoor storage or direct exposure to sunlight!
No tilting or stacking!
Open the cabinet door and check the inverter thoroughly to ensure the
completeness and intactness before installing the inverter stored for a long
time. Install the inverter only after it has been tested by qualified personnel.
