31
5 Commissioning
Check if the PVS can operate normally after installation:
Step 1
Connect the connection terminal of each PV string.
Step 2
Measure the input voltage of positive pole and negative pole of each
input to make sure they are basically same and the positive pole and
negative pole are connected correctly.
Step 3
Fasten the fuse holder.
Step 4
Close circuit breaker; D6
monitoring unit power indicator “PWR” lights up
and “CPU” indicator flashes. When push switch is pressed, if there is a
value on the LED digitron, the operation is normal.
Push switch
indicator
Step 5
Lock the door, remove the key.
