Sungrow PVS-12MH-DB, Руководство пользователя

Страница: 16 / 44

5 Electrical Installation User Manual
12
Mounting the PVS onto the installation surface is as described in the following
table.
Step Description Refer to
1 Fix the hangers to PVS. 4.2.2 Fix the hangers to PVS.
2
Fixing PVS to installation
surface.
4.4.3 Fixing PVS to Installation
Surface
4.4.2 Fix the Hangers to PVS
Install the hangers to the installation holes on the back of PVS with delivered
M8 x 16 bolts. The hangers can be installed horizontally or vertically.
For the vertical installation, the distances between hangers are shown in the
following figure "Solution 1".
For the horizontal installation, the distances between hangers are shown in the
following figure "Solution 2".
W1
H1
W2
H2
Solution 1 Solution 2
Hanger
Model
Solution 1 Solution 2
W1 H1 W2 H2
PVS-8MH-DB
621 mm 551 mm 702 mm 470 mm
PVS-12MH-DB
PVS-16MH-DB
816 mm 701 mm 897 mm 620 mm
On site, select an appropriate hanger installation solution according to the
installation plane, such as space condition of the bracket.
For ease of description, Solution 1 is used as an example hereinafter to give a
brief description of PVS mounting steps.
4.4.3 Fixing PVS to Installation Surface
The PVS can be installed in two manners: direct wall-mounted manner and
stainless steel wall-mounted manner.
On site, install the device in appropriate manner selected according to actual
conditions.