49
- - End
7.10.5 System Time
Click the
System Time
to check whether the current system time is correct, synchronize the
system time, and enable/disable "Inverter Timing".
Click
System→System Time
to enter the corresponding interface.
Method of setting system time:
•
When the option
Inverter Timing
is selected, SUNGROW inverter time will be
synchronized with the time of Logger1000.
•
When the clock source is set to
User Define
, user can manually set the current system
time and time zone in the following two manners:
–
Select
Use PC Time
to synchronize the time of the Logger1000 with the time of the
PC.
–
Click the
Time Zone
pull-down-list and select the local time zone. Enter the
Date
and
Time
and click
Save
to manually set the time of the Logger1000.
•
When the clock source is set to
NTP
, time of all devices can be synchronized. Click the
Time Zone
pull-down-list and select the local time zone. Fill in the
Domain
, set the
Time
interval
, and click
Save
. In this way, the time of the Logger1000 is synchronized with the
time of the server.
•
The clock source is set to
IEC104
. In this way, the Logger1000 and the background must
use the IEC104 communication protocol, and otherwise, this manner is invalid.
•
The clock source is set to
iSolarCloud
.
•
The clock source is set to
MODBUS-TCP
.
It is recommended to select
User Define
during debugging.
It is recommended that the top priority should be given to the IEC104 and then the
iSolarCloud.
User Manual
Содержание Logger1000
