User’s Manual
Stackable Power Disks
Model: SPB0200 / SPB0201 / SPB0202
Interface Description
Magnet
4 LED
Indicator
Micro input
Connector pin
USB
output
1
GETTING TO KNOW YOUR POWER DISK
2
GETTING TO KNOW YOUR POWER DISK
INSTRUCTIONAL USAGE
Note:
3
1. Charging the Power Disk
INSTRUCTIONAL USAGE
Connect the AC
Adapter: AC110V-220V
Output: DC5V/1A
Notebook PC USB port
One
One
Connect the AC
Adapter: AC110V-220V
Output : DC5V/1A
Notebook PC USB port
Group
Group
INSTRUCTIONAL USAGE
2. Charging the device via USB output port
One
Group
3. LED Indicator:
Remarks: LED light-off LED Shining LED light-on
Charging
the power
disk
Standby or
charging
the device
Capacity
Show
Show
25%
25%
50%
50%
75%
75%
100%
100%
Capacity
4
On/Off Switch, also used to
display capacity in battery
The Power Disk is a stackable rechargeable battery that allows you
to charge your mobile devices.
Single Power Disk's capacity: 3000mAh
If you select 2 Power Disk package, you get 6000mAh
If you select 3 Power Disk package, you get 9000mAh
Note: To keep best connection, we suggest stacking 7 disks or less.
Before first use of your stackable Power Disk battery, please charge
it fully.
Once stacked, the disks operate as a unified group. You can charge
the battery group by plugging the USB charging cable into the
micro-USB of any Power Disk in the group. Likewise, you can charge
device(s) via the USB output port(s) from any Power Disk in the group.
When separated, each disk can operate fully on its own, able to be
charged and to charge other devices.
It is best to separate the group while Power Disks are NOT charging.
Sometimes, when the power bank cannot be waked up automatically
by connecting a device, please press “on/off switch” key to wake up
the power bank.
Connect one end of the USB charger to the micro-USB input port on the
Power Disk and the other end into the power source (AC Wall Adapter
or Computer USB port). The Power Disk/Stack will begin charging as
soon as power is connected.
(The output current of computer USB port is 500mA, the charging
time will be longer than using wall adaptor) See below chart
See below chart. Once you connect your device to the Power Disk via
the USB charging cable, you will need to hit the On/Off switch in order
to turn the Power Disk on and commence charging.
Note: The included USB cable can be used for charging only; it
cannot be used for data transfer.
Note:
Once the device is charged, the LED light will turn off automatically.
Press the capacity-show switch to see the remaining capacity in the
PowerDisk battery. Once the LED lights display to show capacity, they
will turn off automatically (after about 10 seconds).
The 3-tip charging cable should only be used to connect to one device
at a time. Connecting devices to each of the three tips simultaneously
will exceed the output rating of the charging cable.