1/8
L
R
200/200 bar
239+239=478 Nm
250/250 bar
298+298=596 Nm
350/350 bar
418+418=836 Nm
PUMP SCPD 76/76 DIN
Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com
7014GB1901 REV 1.3
Instruction manual
Thank you for choosing Sunfab
You have chosen SCPD 76/76, a dual flow pump with the
highest displacement-to-size-ratio on the market. It can
effectively be directly mounted on gear boxes equipped
with engageable and disengageable power take-offs.
Compact design and easy installation makes SCPD 76/76
one of the most important components for a powerful,
trouble free hydraulic systems.
Remember
A trouble-free hydraulic system is created using selected
components and correct installation. Consequently, follow
the instructions in this manual, which includes checking
the power take off, tank design, hose dimensions, instal-
lation and start up. Failure to carry out the manufacturer’s
installation conditions will invalidate the warranty.
Installation requirements
Power Take-Off
• Pump mounting: Spline shaft DIN 5462 / ISO 14.
Mounting flange ISO 7653-D.
• It must be possible to disengage the power take off to
prevent overspeed when the hydraulic system is not in
use.
• The output speed of the power take off must not exceed
the pump’s max speed.
• The permitted torque output on the power take off must
be higher than the pump’s shaft torque at maximum
pressure.
• The power take off’s direction of rotation must corre-
spond with the selected pump, which is supplied in left-
hand (L) or right-hand (R) designs.
NOTE!
The cover must not be turned to change the direc-
tion of rotation.
GB
