Sunell Security SN-TPC4201VT Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 59

Sunell Security SN-TPC4201VT Скачать руководство пользователя страница 13

Thermal Imaging Box Network Camera
User Manual

Product Overview

Issue V1.0 (2020-10-28

）

5

Char

Physical Interface

Connection

LAN

Network interface

Connects to the standard Ethernet cable.

DC 12V

Power interface

Connects to the 12 V DC power supply.

Ground

GND

SD
CARD

SD card slot

Plug the SD card to save the video recording.

Zoom

Zoom port

Connect to zoom control cable of motorized
lens.

1.3 Functions and Features

⚫

Using the uncooled infrared focal plane sensor.

⚫

Detecting the infrared wavelength ranging from 8 um to 14 um.

⚫

400*300 pixels.

⚫

High thermal sensitivity, reaching 40 Mk.

⚫

Supporting dedicated lens for 8/15/25/35/50 mm focal distance (optional), and
motor lens for 8/25/50/75 / 100 mm (optional).

⚫

Support 17 pseudo color modes such as black hot, white hot, rainbow, iron bow and
so on.

⚫

Support the DVE image enhancement.

⚫

Support noise reduction and mirroring.

⚫

Support three coding algorithms, these are H. 265, H. 264 and MJPEG, high
compatibility.

⚫

In the heat setting temperature measuring points in the image or temperature area,
temperature detection and display: point temperature measurement, regional
temperature measuring, full screen (the highest temperature, the lowest temperature
and the average temperature) temperature measurement. User can set over
temperature warning and over temperature alarm.

⚫

Output two code streams in real time, and satisfying local storage and network
transmission of the video.

⚫

1-channel audio input and 1-channel audio output, supporting bidirectional voice
talkback.

⚫

Support the local storage, Micro SD card (the maximum capacity is 128 GB) and
effectively resolving the video loss problem caused by network failure.

⚫

Provide software and hardware watchdogs and automatic fault recovery.

⚫

Linked heat dissipation structure of the metal enclosure.

⚫

DC 12 V.

«
...
11
12
13
14
15
...
»

Содержание SN-TPC4201VT




























































Отзывы:

Нет отзывов