Sundance Spas SMT351, Руководство пользователя

Страница: 12 / 24

FPGA Configuration
There are two ways to configure the FPGA:
1. Use the on-board JTAG header and Xilinx JTAG programming tools.
2. Send the configuration bitstream down the comport selected by SW1. The
Sundance library for the SMT351 includes a function to configure the FPGA in
this way.
The table below gives the possible settings for SW1:
Table 2: configuration comport selection.
Comport
number Switch
number 1 Switch
number 2 Switch
number 3 Switch
number 4
0 ON ON ON X
1 ON ON OFF X
2 ON OFF ON X
3 OFF OFF OFF X
4 OFF ON ON X
5 OFF ON OFF X
X: irrelevant
The factory setting selects comport 3 to configure the FPGA.
At power up the FPGA is not configured.
LED D1 will be lit upon FPGA configuration.