Grow Light Lift Kit
Congratulations on your purchase of a state of the art
Sun Hoist
™
Wireless Light Lift System
!
To ensure that you get the most out of
your Sun Hoist Wireless Light Lift System, please read these instructions
completely and carefully BEFORE installing or operating your system.
To operate your Sun Hoist
Wireless Light Lift System
you will need to download the
MySmartLift application. Go
to Apple Store or Google Play
Store to download. There is no
cost for the MySmartLift app.
INSTALLATION
1
Install the mounting rail
in a suitable location above
the desired area with the
screws provided.
Use template printed at the
end of these instructions for
hole placement.
It is the users’ responsibility
to ensure that the support
used is adequate to bear
the weight of the Sun Hoist
System and associated
hardware.
2
Slide Sun Hoist onto rail
and tighten thumbscrew to
anchor. Do not over-tighten.
3
The Sun Hoist has an auto-
leveling feature that uses a
magnetically mounted sensor
mounted to the top of the
grow light. IMPORTANT: The
level sensor must be mounted
parallel to the front and
back edges of the grow light
housing.
ALSO
, the sensor
unit logo must be to the front,
with the cord connection on
the left side.
See Fig 1.
4
Plug the sensor coil cord
into the sensor and into the
corresponding port
on the Sun Hoist labeled
Auto Level Sensor.
Double check the position
of the level sensor and cord
connection for accurate
operation.
See Fig 1.
5
Attach one end
of the power
supply to the
Sun Hoist port
labeled Power
Port.
The Sun Hoist Wireless Light Lift System is designed to control
a total lighting load of not more than 60 pounds. Ensure that the
light, ballast (if required) and any hood vent hardware DOES NOT
EXCEED 60 pounds total.
SUN HOIST KIT COMPONENTS
• 1 each Sun Hoist Lift Motor • 1 each Auto Level Sensor
• 1 each Power Supply with Cord
• 1 each Mounting Rail with 2 screws
Do not exceed
a total weight
of
60 pounds
for
all components.
TIGHTEN
THUMBSCREW
Watch this Sun Hoist
Installation Video after
reading these instructions.
QR
CODE
FIG 1.
4.00 in
MOUNTING RAIL TEMPLATE
