Sun Oracle OSCM6, Руководство по соответствию

Страница: 11 / 62

7
Safety Agency Compliance Statements
Read this section before beginning any procedure. The following text provides safety precautions to follow when
installing a Oracle product.
Safety Precautions
For your protection, observe the following safety precautions when setting up your equipment:
■
Follow all cautions and instructions marked on the equipment.
■ Ensure that the voltage and frequency of your power source match the voltage and frequency inscribed on
the equipment’s electrical rating label.
■
Never push objects of any kind through openings in the equipment. Dangerous voltages may be present.
Conductive foreign objects could produce a short circuit that could cause fire, electric shock, or damage to
your equipment.
■
This product is intended for restricted access whereby access is controlled through the use of a means of
security (for example, key, lock, tool, badge access) and personnel authorized for access have been instructed
on the reasons for the restrictions and any precautions that need to be taken.
■ Do not directly connect this product to outdoor metallic signal cables. Always connect the product to
outdoor metallic signal cables using a protection device that is designed for direct connection to outdoor
metallic signal cables (such as a switch or router), or use optical non-metallic signal cables upon leaving the
building.
■ Do not directly connect this product to outdoor power cables.
■
For AC Power, connect the product only to an indoor power distribution system that uses current-
limiting circuit breakers for AC power.
■
For DC Power, connect the product only to earthed power systems that are completely contained within
one building.
Symbols
The following symbols may appear in this book:
Caution – There is a risk of personal injury and equipment damage. Follow the instructions.
Caution – Hot surface. Avoid contact. Surfaces are hot and may cause personal injury if touched.
Caution – Hazardous voltages are present. To reduce the risk of electric shock and danger to
personal health, follow the instructions.
Depending on the type of power switch your device has, one of the following symbols may be used:
On – Applies AC power to the system.
Off – Removes AC power from the system.