Sun Oracle Fire X4470, Руководство по установке

Страница: 52 / 76

42 Sun Fire X4470 Server Installation Guide for Windows Operating Systems • June 2010
■
A console connection is established to the server. For details, see “Console
Options for Performing an OS Installation” on page 33 .
▼
View or Edit BIOS Settings for New Installations
1. Reset the power on the server.
For example:
■
From the ILOM web interface , select
Remote Control
-->
Remote Power
Control
, then select
Reset
from the
Select Action
list box.
■
From the local server , press the Power button (approximately 1 second) on the
front panel of the server module to turn the server off, then press the Power
button again to power-on the server.
■
From the ILOM CLI , type:
reset /SYS
The BIOS screen appears.
2. When prompted in the BIOS screen, press F2 to access the BIOS Setup Utility.
After a few moments, the BIOS Setup Utility appears.
3. To ensure that the factory defaults are set, do the following:
a. Press F9 to automatically load the optimal factory default settings.
A message appears prompting you to continue this operation by selecting
OK
or to cancel this operation by selecting
CANCEL
.
b. In the message, highlight
OK
then press Enter.
The BIOS Setup Utility screen appears with the cursor highlighting the first
value in the system time field.
4. In the BIOS Setup Utility, do the following to edit the values associated with
the system time or date.
a. Highlight the values you want to change.
Use up or down arrow keys to change between the system time and date
selection
b. To change the values in the highlighted fields, use these keys:
■
PLUS (+) to increment the current value shown
■
MINUS (-) to decrement the current value shown
■
ENTER to move the cursor to the next value field
5. To access the boot settings, select the
Boot
menu.
The Boot Settings menu appears.