Sun Oracle Fire X4470, Руководство по установке

Страница: 34 / 76

24 Sun Fire X4470 Server Installation Guide for Windows Operating Systems • June 2010
For guidelines for adding drivers to the WIM installation image(s), see
Appendix E .
■
Obtain the WIM Administrator password.
▼
Install Windows Server 2008 (SP2 or R2) Using PXE
Network Boot
1. Reset or power on the server.
■
From the ILOM web interface , select
Remote Power
-->
Remote Power
Control
ltab, then select
Reset
from the Host Action list box.
■
From the local server , press the Power button (approximately 1 second) on the
front panel of the server to turn off the server, then press the Power button
again to power on the server.
■
From the ILOM CLI , type:
reset /SYS
The BIOS screen appears.
Note – The next events occur very quickly; therefore, focused attention is needed
for the following steps. Watch carefully for these messages as they appear on the
screen for a brief time. You might want to enlarge the size of your screen to eliminate
scroll bars.
2. Press F8 to specify a temporary boot device.
The Please Select Boot Device menu appears.
3. In the Please Select Boot Device menu, select the appropriate PXE installation
boot device and press Enter.
The PXE installation boot device is the physical network port configured to
communicate with your network installation server.
The Boot Agent dialog appears.
4. In the Boot Agent dialog, press F12 for a network service boot.
5. Continue the normal Windows Server 2008 SP2 or 2008 R2 WDS network
installation.
For additional information, consult Microsoft’s Windows Deployment Services
product documentation.
6. When the installation completes, proceed to Chapter 4 to perform the post
installation tasks.