Sun Oracle BLADE T6320, Руководство по установке, Страница: 39 / 40

Chapter 2 Installation and Configuration 29
JumpStart Server Configuration
Specific instructions on how to configure a JumpStart server are out of the scope of
this document. However, configuring the JumpStart server consists of the following
tasks:
1. Load the Solaris OS.
2. Create the configuration server.
3. Create the configuration files.
4. Verify the configuration file syntax.
5. Share the installation directory.
6. Start the NFS server.
7. Configure the client access.
The configuration and use of the JumpStart server depends on the configuration of
your network. For a full explanation of these steps and instructions on how to
configure the JumpStart server, refer to the following documents:
■
Configuring JumpStart Servers to Provision Sun x86-64 Systems by Pierre Reynes,
Network Systems Group, Sun BluePrints OnLine, February 2005
■
Building a JumpStart Infrastructure by Alex Noordergraaf, Enterprise Engineering,
Sun BluePrints OnLine, April 2001
You can obtain these documents from the following site:
http://www.sun.com/blueprints