Sun Oracle BLADE T6320, Руководство по установке, Страница: 38 / 40

28 Sun Blade T6320 Server Module Installation Guide • April 2010
Installing the Solaris Operating System
on a Hard Drive
The basic configuration of Oracle’s Sun Blade T6320 server module ships with or
without hard drives. If you ordered an optional hard drive with preinstalled
software, refer to
“Preinstalled Software” on page 4 .
If you ordered an optional hard drive without preinstalled software and want to
install the Solaris OS on the hard drive in slot 0, you must install the operating
system from your network.
For instructions on how to install the operating system from the network, refer to the
Solaris Installation Guide: Network-Based Installations . You can obtain this guide at:
http://docs.sun.com/
JumpStart Server Installation
You can use a JumpStart server to install the OS. A JumpStart server consists of
several components:
■
Install client – The target system to be installed or upgraded.
■
Boot server – The network providing a failsafe operating system to the installing
client.
The boot image is architecture independent, providing basic operating system
services to all hardware supported by that operating system release. The Boot
Server provides RARP, TFTP and bootparam services.
■
Configuration server – A system that helps client systems determine unique profile
information.
Partition sizes, lists of software components to install, begin, and finish scripts are
specified in a profile served by the configuration server.
■
Install server – The source of the software packages to be installed on the client.
Note –
The boot server, configuration server, and install server can be one server.
They do not need to be physically separate servers.