Sun Nuclear Radon 1028, Руководство пользователя

Страница: 57 / 68

51
For serial cable part number, see Accessories on page 48. Serial cable can
also be used with optional printer.
2 If desired, plug the power supply into an AC outlet with 110 to 240 VAC,
single phase, 50-60 Hz.
Figure 28. Optional Serial Connection to a Computer
Port Selection
Normally the software tries to connect to the radon monitor on COM 1. But if
COM 1 is in use, select another COM port as follows:
1 Click the Select Serial Port toolbar button or select Setup > Serial Port from
the menu. The ‘Setup Port’ dialog box opens.
Figure 29. Setup Port Dialog Box
2 Click the Ports drop-down list then select the desired port (usually the last
port in the list).
3 Click Save . When the program is opened again, the selected COM port will
be used.