Sun Microsystems XVR-500, Руководство по установке

Страница: 34 / 50

22 Sun XVR-500 Graphics Accelerator Installation Guide • September 2002
1. Become superuser and open the
/etc/dt/config/Xservers
file.
If the
/etc/dt/config/Xservers
file does not exist, create the
/etc/dt/config
directory and copy the
Xservers
file from
/usr/dt/config/Xservers
to
/etc/dt/config.
2. Modify the file by adding the device locations for the applicable frame buffers
being used.
The following example shows the
Xservers
configuration file modified for one
Sun Creator board and two Sun XVR-500 graphics accelerators:
Changing the Monitor Screen Resolution
For most installations, the Sun XVR-500 graphics accelerator automatically
configures itself to the proper screen resolution and refresh rate for your monitor. If
a Sun monitor, however, is not connected to the Sun XVR-500 graphics accelerator,
the monitor may have the wrong screen resolution. To change the screen resolution,
use the
fbconfig
utility.
#
cd /etc/dt/config
# vi Xservers
# mkdir -p /etc/dt/config
# cp /usr/dt/config/Xservers /etc /dt/config
#
cd /etc/dt/config
# vi Xservers
:0 Local local_uid@console root /usr/openwin/bin/Xsun -dev /dev/fbs/ffb0
-dev /dev/fbs/ifb1 -dev /dev/fbs/ifb0