Sun Microsystems SunSwift SPARCserver 1000, Руководство по обслуживанию

Страница: 49 / 218

Diagnostics and Commands for Troubleshooting 2-3
2
2.2 Using
prtdiag
prtdiag
command is the preferred tool for locating replaceable board
components.
Note –
prtdiag
is a UNIX command. It can only be accessed if the OS is
booted and running on the machine in question.
prtdiag
resides in
/usr/kvm
.
Below is an example of the command and its output, actual output will differ.
Code Example 2-1 The
prtdiag
Command
# ./prtdiag
System Configuration: Sun Microsystems sun4d SPARCserver 1000
System clock frequency:
nn
MHz
Memory size: nnnMb
Number of XDBuses: 1
====== CPU Units [MHz] ======== Memory Groups [MB] =============
A B grp0 grp1 grp2 grp3
-- -- ---- ---- ---- ----
Board0:
nn nn
nn nn nn nn
Board1:
nn nn
nn nn nn nn
Board2:
nn nn
nn nn nn nn
Board3: nn nn nn nn
======================SBus Cards==========================
Board0: 0: dma/esp(scsi) ‘SUNW,500-nnnn’
lebuffer/le(network) ‘SUNW,500-nnnn’
1: dma/esp(scsi) ‘SUNW,500-nnnn’
lebuffer/le(network) ‘SUNW,500-nnnn’
2: cgsix ‘SUNW,501-nnnn’
3: dma/esp(scsi) ‘500-nnnn-01’
lebuffer/le(network) ‘500-nnnn-01’
Board1: 0: <empty>
1: dma/esp(scsi) ‘500-nnnn-01’
lebuffer/le(network) ‘500-nnnn-01’
2: bf ‘SUNW,501-nnnn’
3: bf ‘SUNW,501-nnnn’
Board2: 1: <empty>
2: <empty>
3: <empty>
Board3: 1: <empty>
2: <empty>
3: <empty>