14
Sun SPARC Enterprise Mx000 Servers Capacity on Demand (COD) User’s Guide • September 2007
▼
To Display Usage Statistics for COD Resources
1. Log in to the XSCF console with
platadm
or
platop
privileges, or
domainadm
,
domainop
, or
domainmgr
privileges for a specific domain.
2. Type the
showcodusage
command.
The output displays a summary of license usage by resource type and for each
domain. For example:
To display usage statistics only for domains or resources, use the
showcodusage -p domain
command or the
showcodusage -p resource
command. All COD usage information can be displayed with the
showcodusage -p all
command.
You can also use the
showboards
command to identify which board is a COD
board. The output from this command has a column titled “COD”. This column
contains an “n” for a non-COD board or a “y” for a COD board. For example, on
a high-end server you might see::
XSCF>
showcodusage
Resource In Use Installed Licensed Status
-------- ------ --------- -------- ------
PROC 0 4 0 OK: 0 available
Domain/Resource In Use Installed Reserved
--------------- ------ --------- --------
0 - PROC 0 4 0
1 - PROC 0 0 0
2 - PROC 0 0 0
3 - PROC 0 0 0
Unused - PROC 0 0 0
XSCF>
showboards -v -a
XSB R DID(LSB) Assignment Pwr Conn Conf Test Fault COD
---- - -------- ----------- ---- ---- ---- ------- -------- ----
00-0 00(00) Assigned y y y Passed Normal n
01-0 SP Unavailable y n n Unknown Normal y
01-1 SP Unavailable y n n Unknown Normal y
01-2 SP Unavailable y n n Unknown Normal y
01-3 SP Unavailable y n n Unknown Normal y
