68
Sun Fire X4150 Server Product Notes • February 2010
■
CR6758579: Receiving memory errors in SEL log to non-decodable address.
There are some non-decodable addresses of memory error events sent from the
BIOS. This will be fixed to define a field to support the number of DIMM errors.
■
CR6767086: Chassis "no usable memory" event appears with incorrect sensor
name.
When you power on the system with no usable memory (no DIMMs), the BIOS
reports "no usable memory" and does not power on. The message that appears in
the event log uses the incorrect sensor name.
■
CR6768737: BIOS Restore on AC Power Loss “Last State” setting does not work.
When the "Restore on AC Power Loss" is set to "Last State" from BIOS menu, the
last state is not restored.
■
CR6774048: BIOS sends a hard reset SEL log while system power is on or the
system is power cycled.
When performing a "power on" action, the BIOS will send out a "initiated by hard
reset" event long. This is changed to "initiated by power up" in Tools and Drivers
CD 2.2.1.
Issues Fixed in Tools and Drivers DVD Version 2.2.0
BIOS Issues Fixed
The following issues have been fixed with the BIOS update included on this Tools
and Drivers CD:
■
CR6787270: There are some problems with configuring the Intel Quad Gigabit
Ethernet card
■
CR6728704: When the Solaris prtdiag command is run, cards are shown in the
wrong slots.
■
CR 6743812: When the server is populated with a maximum of 64GB memory (16
x 4GB) and two Neptune option cards are installed, the system hangs up during
POST.
■
CR6743509: The SMBIOS manufacturer field ends with white space.
■
CR6786753: The SATA HDD LED light needs to be implemented via SGPIO.
■
CR6782662: BIOS GUID is different than ILOM UUID. These values should be the
same.
■
CR6750940: Missing memory from the server is not reported as a failure in the
SEL.
■
CR6710644: Severe uncorrectable ECC DIMM errors do not get reported in the
SEL event log of BIOS.
