18
Sun Fire X4150 Server Product Notes • February 2010
■
Slots 4-7 can be populated with SAS drives.
■
The backplane cable for drives 4-7 is plugged into HBA card port 0 using the
shorter cable from cable kit (X)6388A.
■
HBA port 1 is unpopulated.
Enabling Open I/O AT Feature in BIOS Setup
Menu
If you are running Intel I/O AT test tool, you need to enable the feature in the BIOS
menu first.
●
In the BIOS Setup menu, select Advanced -> PCI Configuration -> Crystal
Beach/DMA to enable the feature.
Serial Console Does Not Show the Host Reboot
After the Sharing Owner Is Set in ILOM
When you change the serial port sharing owner in the ILOM WebGUI or CLI from
the SP to the host, the connect serial port connects, but you see no output.
This issue will be fixed in a future BIOS release.
▼
Workaround
Change the serial port sharing from SP to System using the BIOS menu directly, as
follows:
1. In the BIOS setup menu, select Server -> External Serial Port
2. Change the External Serial Port selection from “SP” to “System”.
Possible Firmware Update Needed for Qimonda
DIMMs
If you are using the Qimonda Memory 2GB/DDR2 HYS72T256421EFA-3S-C2, your
server must be running the one of following BIOS versions:
■
ILOM BIOS 1ADQW052. or later
■
ELOM BIOS 1ADQW027 or later
