Sun Microsystems Sun Fire V880z Скачать руководство пользователя страница 107

Страница: 107 / 128

Appendix D

Sun Fire V880z Server Upgrade

9. Close the Sun Fire V880z server enclosure door.

a. If you removed the side door, remount it to the chassis.

Position the side door mounting pins over the corresponding holes in the chassis
rear panel and lower the side door into place.

b. Close the side door.

Make sure that the door is firmly seated in its frame.

c. Lock the side door with the system key.

10. Attach the appropriate monitor cables to the Sun XVR-4000 graphics accelerator

backplate on the Sun Fire V880z back panel.

11. Power on the Sun Fire V880z server.

12. Perform a reconfiguration reboot:

Halt (Stop-A) your system for the ok prompt.

Refer to the section “How to Initiate a Reconfiguration Boot” in the Sun Fire V880
Server Owner’s Guide.

Note –

Verify the OpenBoot PROM version level. OpenBoot PROM version 4.7.0 or

later is required. If the OpenBoot PROM version is less than version 4.7.0, install the
OpenBoot PROM upgrade (Appendix C).

Upgrade Technical Support

You may have Sun service technicians perform your server upgrade. For assistance
and other information, see Sun Support Services at:

http://www.sun.com/service/online/

Refer to the following hardware documentation for detailed service information for
the Sun Fire V880z server:

■

Sun Fire V880 Server Service Manual (806-6597)

■

Sun Fire V880 Server Owner’s Manual (806-6592)

ok boot -r

Содержание Sun Fire V880z

































































































































Результаты поиска

Содержание Sun Fire V880z

Отзывы:

Похожие инструкции для Sun Fire V880z

Бренды по названию

Популярные бренды

Sun Microsystems Sun Fire V880z, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Sun Fire V880z

Отзывы:

Похожие инструкции для Sun Fire V880z

Бренды по названию

Популярные бренды