Sun Microsystems StorEdge MultiPack-FC, Инструкция по установке, эксплуатации и обслуживанию

Страница: 41 / 84

Chapter 2 Operation 2-7
FIGURE 2-5
Box ID Switch Location
2.3.1 Connecting One Unit to the Host
1. Check that the box ID is set to 1 before connecting the unit to the host.
2. Invoke the
forcelip
operations in Step 3 of Section 2.5 on pages 2-9 and 2-10.
2.3.2 Daisy Chaining Two Units to the Host
Note –
For daisy-chain cabling applications, refer to Section 1.3.6 “Cabling
Applications” on page 1-8.
1. Check that the box ID of the first unit is set to 1.
2. Set the box ID of the second unit to 2.
3. Connect the second unit to the first unit.
4. Connect the first unit to the host.
5. Invoke the
forcelip
operations in Step 3 of Section 2.5 on pages 2-9 and 2-10.
Box ID switch