Sun Microsystems StorEdge L1000 Скачать руководство пользователя страница 56

Страница: 56 / 128

Sun StorEdge L1000 User’s Guide • May 1998

Turning the Library On and Off

To ensure smooth operation, follow these steps when turning the library on or off.

▼

To Turn the Library On

1. Be sure of the following:

■

All internal packaging is removed.

■

The front doors and load port are closed.

■

The library enclosure is installed.

■

All back panel connections are secure.

2. At the front panel, set the AC power switch to the | (on) position.

After several seconds, verify that control panel comes on.

▼

To Turn the Library Off

1. Press the Standby button.

Verify that the library completes the current command and then goes off-line.

2. Make sure the gripper is empty by checking the Overview control panel screen.

If the gripper has a tape cartridge, use the Move Cartridge command to move the
cartridge to a storage bin or load port.

3. Set the AC power switch to the O (off) position.

Verify that the control panel turns off.

Содержание StorEdge L1000

































































































































Результаты поиска

Содержание StorEdge L1000

Отзывы:

Бренды по названию

Популярные бренды

Sun Microsystems StorEdge L1000, Руководство пользователя

Результаты поиска

Содержание StorEdge L1000

Отзывы:

Бренды по названию

Популярные бренды