Sun Microsystems StorEdge 3000 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 40 / 318

2-2 Sun StorEdge 3000 Family Installation, Operation, and Service Manual • March 2004
2.1 Customer Obligations
The customer is obliged to inform Sun Microsystems, Inc. of any and all ordinances
and regulations that would affect installation.
Caution –
When selecting an installation site for the Sun StorEdge 3510 FC Array,
choose a location that avoids excessive heat, direct sunlight, dust, or chemical
exposure. Such exposure greatly reduces the product’s longevity and might void
your warranty.
The customer is responsible for meeting all government codes and regulations
concerning facilities. The customer is also responsible for compliance with the
following requirements:
■
Meeting all local, national, and international codes covered in this specification.
The subjects covered include fire and safety, building, and electrical codes.
■
Documenting and informing Sun Microsystems, Inc. of any deviations from “Sun
StorEdge 3510 FC Array Specifications” on page A-1 .
2.2 Safety Precautions
For your protection, observe the following safety precautions when setting up your
equipment:
■
Follow all safety precautions and requirements specified in the Sun StorEdge 3000
Family Safety, Regulatory, and Compliance Manual.
■
A fully loaded array weighs over 50 pounds. Use two people to lift the array to
avoid injury.
■
Follow all cautions and instructions marked on the equipment.
■
Ensure that the voltage and frequency of your power source match the voltage
and frequency inscribed on the equipment’s electrical rating label.
■
Never push objects of any kind through openings in the equipment. Dangerous
voltages might be present. Conductive foreign objects could produce a short
circuit that could cause fire, electric shock, or damage to your equipment.