manualshive.com logo in svg

Sun Microsystems StorEdge 3000 Series, Руководство по лучшим практикам

Поделиться
Скачать
Sun Microsystems StorEdge 3000 Series Скачать руководство пользователя страница 34

18

    Sun StorEdge 3000 Family Best Practices Manual

 

• March 

2007

The challenge of selecting between DAS and SAN is often further complicated by the 
need to choose between different storage systems, one designed for DAS or another 
intended for SAN. Fortunately, Sun StorEdge 3510 FC arrays and Sun StorEdge 3511 
SATA arrays inherently support both DAS Sun StorEdge 3510 FCnd SAN.

Direct-Attached Storage

One powerful feature of Sun StorEdge 3510 FC arrays and Sun StorEdge 3511 SATA 
arrays is their ability to support multiple direct-attached servers without requiring 
storage switches. They accomplish this by using intelligent internal Fibre Channel 
networks. Servers can be directly connected using built-in external Fibre Channel 
ports, if available, or add-in Fibre Channel host adapter cards.

■

Sun StorEdge 3510 FC arrays automatically configure ports to match the transfer 
speed and communication method of each connection.

Note – 

Some older 1-Gbyte FC HBAs do not correctly support current auto-

negotiation. In such configurations, set the transfer speed to 1-Gbyte rather than 
Auto. Refer to the release notes for your array to see the HBAs supported for your 
host and any limitations. Refer to the 

Sun StorEdge 3000 Family RAID Firmware User’s 

Guide 

for information about how to set transfer speed.

■

For Sun StorEdge 3511 SATA arrays, channels 0 and 1 automatically configure 
their ports to match the transfer speed and communication method of each 
connection. Channels 4 and 5 only support a 2-Gbyte transfer rate.

FIGURE

 

3-2 

Two DAS Configurations

 

 

Standard DAS Configuration

High Availability DAS Configuration

Содержание StorEdge 3000 Series























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды