Sun Microsystems StorageTek T10000, Руководство оператора

Страница: 87 / 120

96174 • Revision EA 85
A P P E N D I X
B
Data Cartridge Labels
Rack Mount Cartridge Labels
If you are using the data cartridges in a rack mount situation, almost any label across
the data cartridge is acceptable, as long as it does not interfere with the operation of the
tape drive.
Library Use Cartridge Labels
If you are using the data cartridges in a library, the labels must conform to the
specification shown in
“Label Size Specification” on page 87 . You must put these labels
on the data cartridge in the label attachment area as shown by item 1 in
FIGURE 1-4 on
page 28
. You must carefully place these labels in the label area with the bar code down
(to the hub side of the data cartridge–the hub is showing in the “Bottom View” in
FIGURE 1-4 on page 28
).