Sun Microsystems StorageTek T10000, Руководство оператора

Страница: 58 / 120

Menu Operations
56 T10000 Operator’s Guide • July 2008 Revision EA • 96174
The view-only Drive Firmware Level menu displays the drive’s current firmware
release level in
R
x.yy.zzzc
format, where:
■
x = major revision level,
■
y = minor revision level,
■
z = integration number,
■
c = channel interface type: for FC.
The Exit Menu allows you to exit the menu system, or to loop-back to the
Online/Offline selection menu.
Offline Menu Operation
When the drive is offline, the menus shown below are active. Press Menu (one or more
times) to advance to the Change Configuration menu.
Note – At each main menu you have two choices:
■
Press Menu (No) to bypass, and advance to the next menu.
■
Press Select (Yes) to enter the submenus.
The Change Configuration submenus allow you to change drive configuration settings.
See
TABLE 4-1 on page 60
for additional information.
Change Change Drive Drive Exit
Configuration TCP/IP Operations Firmware Menu
Interface Select DHCP (Y/N) IPL from Tape Current firmware Exits menu
Port A Attributes IP (High) Make Dump Tape release level system
Port B Attributes IP (Low) Make Code Tape
Emulation Net Mask (High) Make Data Tape
Compress Net Mask (Low) Build MIR
DSE Gateway (High) Exit (Y/N)
Logical Drive
Address Gateway (Low)
Save/IPL (Y/N)
(FICON only) Exit (Y/N)
Standard Label
Protect
Language
Tape Bar Usage
Library Address
WWN (High)
WWN (Low)
Serial number
(view only)
Save/IPL (Y/N)
Exit (Y/N)