Sun Microsystems StorageTek SG-XPCIE1FC-QF8-Z, Руководство по установке, Страница: 43 / 68

Chapter 3 Software Installation 33
4. If the system displays the following message, click Yes to restart the computer:
Diagnostic Support for the Windows OS
Diagnostic support for the HBA is available through QLogic’s SANsurfer FC HBA
Manager (GUI) tool and the SANsurfer FC HBA CLI tool. These tools support the
following functions:
■
Connectivity verification
■
BIOS, FCode, EFI, and firmware version information
■
Link status, including topology, data rate, and statistics
■
Vital Product Data (VPD) information
■
Attached devices list
■
Option ROM, NVRAM update utilities
■
Loopback test
■
Read/Write Buffer test
▼
To Install Diagnostic Support for the Windows OS
1. Go to the QLogic support site for Sun Microsystems at:
http://support.qlogic.com/support/defaultsun_page.asp
2. Locate the table containing the HBA model: single-port SG-XPCIE1FC-QF8-Z or
dual-port SG-XPCIE2FC-QF8-Z.
3. At the bottom of the table, click Windows.
4. Locate the SANsurfer CLI or SANsurfer PRO (GUI) diagnostic utility.
5. Click Download to copy the diagnostic archive to a local file system.
6. Click Readme for additional information.
System Settings Change. Windows has finished installing a new
device. The software that supports your device requires that you
restart your computer. You must restart your computer before the
new settings will take effect. Do you want to restart your computer
now?