Sun Microsystems StorageTek SG-XPCIE1FC-QF8-Z, Руководство по установке

Страница: 41 / 68

Chapter 3 Software Installation 31
▼
To Install Diagnostic Support for the Red Hat/SUSE
Linux OS
1. Go to the QLogic support site for Sun Microsystems at:
http://support.qlogic.com/support/defaultsun_page.asp
2. Locate the table containing the HBA model: single-port SG-XPCIE1FC-QF8-Z or
dual-port SG-XPCIE2FC-QF8-Z.
3. At the bottom of the table, click Windows.
4. Locate the SANsurfer CLI (command-line interface) or SANsurfer PRO (GUI)
diagnostic utility.
5. Click Download to copy diagnostic archive to a local file system.
6. Click Readme link for additional information.
Installing Software for the VMware
Technology
The HBA drivers included on the VMware distribution are sufficient for supporting
the HBA. No further action is required.
To verify that the drivers loaded successfully, look for the following lines in the
/var/log/vmkernel
file:
The first line indicates that the fibre channel driver loaded successfully.
Installing Software for the Windows OS
This section describes how to download and install the fibre channel drivers
required by the HBA. It also describes how to install diagnostic support software for
the HBA. This section contains the following topics:
■
“To Download the Fibre Channel Driver” on page 32
Initialization for qla2300_707_vmw succeeded with module ID 2.
[ timestamp ] b12-4600a vmkernel: 0:00:01:18.878
cpu1:1041)qla2300_707_vmw loaded successfully.