Sun Microsystems StorageTek 5320, Руководство по началу работы

Страница: 192 / 226

172 Sun StorageTek 5320 NAS Appliance and Gateway System Getting Started Guide • May 2006
▼
To Configure Storage on the Sun StorageTek 5320 NAS
Gateway Cluster System
1. Reboot server H1 using Web Admin or the LCD panel:
■
Using Web Admin, in the navigation panel, select System Operations > Shut
Down the Server. Then select Reboot Both Heads, and click Apply.
■
Using the LCD panel, select B. Shutdown Server from the menu. Then select B.
Reboot. The LCD displays “Are you sure? No.” Press the up arrow button to
change to “Yes.” Then press the ENTER or right arrow button to reboot.
2. Power off server H2 using Web Admin or the LCD panel:
■
Using Web Admin, in the navigation panel, select System Operations > Shut
Down the Server. Then select Halt Both Heads, and click Apply.
■
Using the LCD panel, select B. Shutdown Server from the menu. Then select A.
Power Off. The LCD displays “Are you sure? No.” Press the up arrow button to
change to “Yes.” Then press the ENTER or right arrow button to shut down.
3. When server H1 has restarted and the LCD panel displays QUIET, press the
ENTER or right arrow button. Then press the down arrow button until the
flashing cursor is on C. Take All LUNs.
4. Press the ENTER or right arrow button to select C. Take All LUNs.
5. When prompted to “Take All LUNs? No,” press the up arrow button to select
“Yes,” and press the ENTER or right arrow button to start taking LUNs.
The LCD displays “Taking LUNs” followed by a message “Took n LUNs.” After a
few seconds, the display returns to the Network Config menu.
Note – If server H2 is still powered on when you select C. Take All LUNs, you are
prompted to shut down the partner (server H2). After you power off server H2, the
display on server H1 changes to “Taking All LUNs.”
6. Select Escape to return to the main menu.
Server H1 is now in the ALONE state.
▼
To Configure Failover
1. Launch a new browser window and enter server H1's IP address.
2. If necessary, accept the “Applet Security Certificate” and wait until the Web
Admin applet is loaded.
3. On the Web Admin login screen, click Apply.
4. In the navigation panel, select High Availability > Recover.