Sun Microsystems SPARC Series, Руководство по обслуживанию, Страница: 55 / 192

Chapter 3 Troubleshooting 3-17
3.5.6 Using the
fmstat
Command
The
fmstat
command reports statistical information and a set of modules that are
associated with the module called Solaris Fault Manager. By using the
fmstat
command, statistical information about the diagnostic engine and diagnostic agent
that are currently involved in fault management can be displayed.
The following output example shows that the fmd-self-diagnosis DE module
(displayed also on the console output) has received accepted events.
3.6 General Solaris Troubleshooting
Commands
Superuser commands of this type are useful to determine whether there is a problem
with the server, network, or another server connected via the network.
This section explains the following commands:
■
“Using the
iostat
Command” on page 3-18
■
“Using the
prtdiag
Command” on page 3-19
■
“Using the
prtconf
Command” on page 3-21
■
“Using the
netstat
Command” on page 3-24
■
“Using the
ping
Command” on page 3-25
■
“Using the
ps
Command” on page 3-26
■
“Using the
prstat
Command” on page 3-27
# fmstat
module ev_recv ev_acpt wait svc_t %w %b open solve memsz bufsz
cpumem-diagnosis 0 0 0.0 0.0 0 0 0 0 3.0K 0
cpumem-retire 0 0 0.0 0.0 0 0 0 0 0 0
disk-transport 0 0 0.0 1793.8 0 0 0 0 40b 0
eft 0 0 0.0 0.0 0 0 0 0 1.2M 0
event-transport 0 0 0.0 0.0 0 0 0 0 210b 0
fabric-xlate 0 0 0.0 0.0 0 0 0 0 0 0
fmd-self-diagnosis 0 0 0.0 0.0 0 0 0 0 0 0
io-retire 0 0 0.0 0.0 0 0 0 0 0 0
snmp-trapgen 0 0 0.0 0.0 0 0 0 0 32b 0
sysevent-transport 0 0 0.0 2395.3 0 0 0 0 0 0
syslog-msgs 0 0 0.0 0.0 0 0 0 0 0 0
zfs-diagnosis 0 0 0.0 0.0 0 0 0 0 0 0
zfs-retire 0 0 0.0 0.0 0 0 0 0 0 0