Sun Microsystems SPARC Enterprise T1000, Руководство администратора

Страница: 44 / 82

26 Sun SPARC Enterprise T1000 Server Administration Guide • April 2007
After you log in to your ALOM account, the system controller command prompt
(
sc>
) appears, and you can enter system controller commands. If the command you
want to use has multiple options, you can either enter the options individually or
grouped together, as shown in the following example. The commands shown in the
following example are identical.
Logging In To The System Controller
All environmental monitoring and control is handled by the system controller. The
system controller command prompt (
sc>
) provides you with a way of interacting
with the system controller. For more information about the
sc>
prompt, see “ALOM
CMT and The
sc>
Prompt” on page 16 .
For instructions on connecting to the system controller, see:
■
“Accessing the System Controller” on page 6
■
“Activating the Network Management Port” on page 7
Note – This procedure assumes that the system console is directed to use the serial
management and network management ports (the default configuration).
sc> poweroff -f -y
sc> poweroff -fy